specialty gear oils -凯发真人首先娱乐

products and services

go to chinese

heavy-duty gear oil et exgear

good resistance to water (including seawater), oil-water separation performance, good resistance to foam generation and prevention of rust and corrosion during use

viscosity
150, 220, 320, 460, 680
application introduction
suitable for spur gears, helical gears, bevel gears and worm gears, etc. recommended for various gearboxes in cement, mining, steel, metallurgy, electric power, electronics, textile, paper, port and other industrial transmission devices.

anti-micro-pitting gear oil et exgear xp

strong protection against micropitting, suitable for different types of gears, especially for the latest heavy-duty gearboxes.

viscosity
150, 220, 320, 460, 680
application introduction
heavy-duty gearboxes for wind turbines, metallurgy, cement, plastics, paper and ceramics industries requiring extreme pressure performance

heavy-duty synthetic gear oil et gearsyn

u.lube et gearsyn 68,100,150,220,320 is a thermally stable, fully synthetic gear oil that extends gearbox life considerably compared to mineral-based gear oil lubrication. special additives make the product very good in anti-wear, anti-rust and anti-oxidation.

viscosity
68, 100, 150, 220, 320, 460, 680
application introduction
designed for bearings and gearboxes in paper mills, plastics, glass, textile industries, mining and outdoor machinery, recommended for chemical industry and high and low temperature operating equipment.

heavy duty synthetic gear oil with anti-microdot et gearsyn xp

u.lube et gearsyn xp 150, 220, 320, 460, 680 is a fully synthetic industrial gear oil, especially for heavy-duty gearboxes where severe operating conditions require anti-wear and anti-rust. the product contains special additives that effectively resist pitting, gray spots and scratches, and provide corrosion resistance in harsh conditions (including seawater environments). the product has good protection with ferrous metals and non-ferrous metals, and has good high and low temperature performance.

viscosity
150, 220, 320, 460, 680
application introduction
suitable for gearboxes in wind power, paper mills, ceramics, steel, textile, cement industries, under severe operating conditions (including high loads, high speeds and extreme temperatures).

open gear break-in lubricant et g-og b-lr

u.lube et g-og b-lr bitumen-free and heavy metal-free, high performance open gear grinding lubricant formulated with special additives to improve tooth contact, eliminate high spots and delay the occurrence of tooth contact fatigue

viscosity
500
application introduction
it is used to lubricate open gears during the break-in period and to improve tooth contact and enhance the fit.

high extreme pressure adhesion gear oil et exgear hpa

u.lube et exgear hpa 220, 320, 460 is an extreme pressure gear oil with excellent adhesion, special adhesion ability, strong adhesion to metal surfaces, difficult to detach, thus providing long life lubrication protection. the product has a very fast oil-water separation capability, minimizing water damage to lubricated parts. it has a very friendly affinity with metal (copper, iron) materials, strong load-bearing capacity and good anti-wear performance, which greatly improves the reliability of equipment operation and extends the working life.

viscosity
220,320,460
application introduction
suitable for gear and bearing lubrication protection in centralized or immersion bath lubrication systems, especially for vertical gearboxes, heavy-duty transmissions, and applications where water enters easily and needs to drain quickly.

open gear operating lubricant et g-og c-3m

u.lube et g-og c-3m is a new generation of lead-free, chlorine-free, asphalt-free and solvent-free environmentally friendly heavy-duty gear grease thickened by new compound soap-based thickener with high viscosity base oil and refined with high-performance extreme pressure resistance, anti-wear, anti-corrosion and anti-rust additives. it has good adhesion performance, extreme pressure anti-wear performance, impact load resistance, and has the necessary performance to adapt to the operating conditions and environmental needs, such as high temperature resistance, water erosion resistance, strong sealing, reducing the impact of dust, good spraying performance, and good pumping performance.

viscosity
3200
application introduction
recommended for open gear lubrication of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: rotary kilns, ball mills, tube mills, rod mills, dryers, pelletizers, drum pulverizers, etc.

high performance lubricants et polygear g 150,220,320,460,680

u.lube et polygear g 150,220,320,460,680 series has excellent resistance to extreme pressure and heavy load, and is an industrial gear oil with excellent performance, using highly refined base oils and high quality, high performance additives, so that the product can reduce friction, reduce power consumption, reduce operating oil temperature and other functions. the product also has good resistance to water (including seawater), oil-water separation performance, the use of the process has a good resistance to foam generation and prevent rust and corrosion.

viscosity
150,220,320,460,680
application introduction
et polygear series industrial gear oil is widely used, especially for spur gears, helical gears, bevel gears and worm gears, etc. it is recommended for various gearboxes in cement, mining, steel, metallurgy, electric power, electronics, textile, paper, port and other industrial transmission devices.

heavy duty gear oil mt exgear 150,220,320

u.lube mt exgear 150,220,320 series are l-ckd industrial heavy-duty gear oils with high performance, using high-quality refined base oils with a variety of high-efficiency imported additives anti-oxidation, anti-rust, extreme pressure anti-wear agents, with better anti-wear and thermal oxidation stability than ordinary industrial gear oils, suitable for heavy-duty gears operating at high temperatures. lubrication. the product can effectively reduce the wear of gears and other moving parts, extend the life of gears; reduce friction, reduce power loss; disperse heat, have a good cooling effect; prevent corrosion and rust; reduce working noise, reduce vibration and impact between gears; flush dirt, especially flush the dirt between the tooth surface, reduce wear.

viscosity
150,220,320
application introduction
it is suitable for the lubrication of gears running under heavy load conditions, and can be used for the lubrication of reducers in mining, chemical industry, machinery, building materials and other industries. compared with iso6743/6-ckc standard industrial gear oil, the product has better extreme pressure bearing capacity.
网站地图